LDX 2101 Lean Stainless Steel Sheets ,coil UNS S32101 Flat rolled
LDX 2101 Lean Stainless Steel Sheets ,coil UNS S32101 Flat rolled overview
LDX 2101 alloy is a low nickel, lean duplex stainless steel that is designed with both superior strength and chloride stress-corrosion cracking resistance, which are much better than 300 series stainless steels.
LDX 2101 was developed for general-purpose use. High chromium and nitrogen content of this alloy along with molybdenum content provide excellent resistance to localized and uniform corrosion.
LDX 2101 acts as a low nickel general purpose substitute for stainless steel grades 304 and 304L. This alloy possesses good fatigue strength, chloride pitting resistance, and good machinability and weldability.
Produc Forms : Sheet, plate , Coil , Strip .wire , Pipe, Tube ,Bar , Profile, Round, Flat, Square, Hexagonal
Duplex LDX 2101 UNS S32101 specification
| LDX 2101 Stainless Steel Trade name | LDX 2101®, Lean Duplex, SS 2101 Steel, LDX 2101 Steel |
| Description | 1.4162 is a LEAN-DUPLEX chromium stainless steel with additional manganese, nickel, molybdenum and copper. |
| UNS S32101 Stainless Steel Application | Chemical, oil and gas, pulp and cellulose industry |
| Special properties | UNS S32101 Duplex Stainless Steel have very good corrosion resistance. Good mechanical characteristics. Good endurance strength. Good weldability. |
| Suitable welding | CN 24/9 LDX PW-FD |
| filler materials |
1.4162 LDX 2101 Lean Duplex
UNS S32101 Pren
UNS S32101 Pren: 27
LDX 2101 UNS S32101 Equivalent
| Material No. | EN Designation | UNS |
| 1.4162 | X2CrMnNiN22-5-2 | S32101 |
- Lean Duplex Stainless steel 2101
- Lean Duplex UNS S32101
- LDX 2101
- Lean Duplex 2101
- UNS S32101
- EN 1.4162
- Alloy 1.4162
Some Normal specification at a glance
| | ASTM | JIS | AISI | EN |
| Grade | S30100 | SUS301 | 301 | 1.431 |
| S30400 | SUS304 | 304 | 1.4301 |
| S30403 | - | 304L | 1.4307 |
| S31008 | SUS310S | 310S | 1.4845 |
| S31603 | - | 316L | 1.4404 |
| S32100 | SUS321 | 321 | 1.4541 |
| S41008 | SUS410S | 410S | - |
| S43000 | SUS430 | 430 | 1.4016 |
| S43932 | - | - | 1.451 |
| S44400 | SUS444 | 444 | 1.4521 |
| S44500 | SUS430J1L | - | - |
Dimension Ranges:
Width: 600mm~2030 mm
Thickness: 2~120.0 mm
Length: 300~6000 mm , Max 18000 mm
Surface Finish: No.1, 2B, BA, No.3, No.4, No.5, No.8, HL, Etching, SB, Ti-coating,color-coating ,embossing .
Stainless steel grade LDX 2101 is used in the following:
- Biodiesel and ethanol plants and tanks
- Palm oil and wine storage tanks
- Bridges, flood gates, and sluice gates
- Washers and paper machine parts
- Pulp and paper mill equipment
- Mixers and agitators
- Architectural applications
- Waste water handling systems
- Ethanol production components
- External absorber and outlet duct reinforcements
- Desalination system chambers and evaporators
- Chemical process pressure vessels, piping and heat exchangers
- Pressure vessels, heat exchangers, tanks, piping systems and tankers
- Hydrogen peroxide bleaching reactors, digesters, and white liquor storage tanks
DIN 1.4162
JIS LDX 2101
EN X2CrMnNiN21-5-1
EN 1.4162
Chemical Composition
The chemical composition of stainless steel grade LDX 2101 is outlined in the following table.
| Element | Content (%) |
| Chromium, Cr | 21-22 |
| Manganese, Mn | 4-6 |
| Nickel, Ni | 1.35-1.70 |
| Silicon, Si | 1 max |
| Nitrogen, N | 0.20-0.25 |
| Copper, Cu | 0.10-0.80 |
| Molybdenum, Mo | 0.10-0.80 |
| Phosphorous, P | 0.040 max |
| Carbon, C | 0.040 max |
| Sulfur, S | 0.030 max |
| Iron, Fe | Balance |
Physical Properties
The physical properties of stainless steel grade LDX 2101 are tabulated below.
| Properties | Metric | Imperial |
| Density | 7.69 g/cm3 | 0.278 lb/in3 |
| Melting point | 1385-1443°C | 2525- 2630°F |
Mechanical Properties
The following table shows mechanical properties of stainless steel grade LDX 2101 (cold rolled plate and sheet).
| Properties | Metric | Imperial |
| Tensile strength (min) | 696 MPa | 101 ksi |
| Yield strength (min) | 530 MPa | 77 ksi |
| Elongation (min) | 30% | 30% |
| Hardness, Brinell (max) | 290 | 290
|
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free . Freight charge collect
Q:What information should i provide to source for the right products ?
A: Material grade, width, thickness, coating and Purchase quantity , Expected lead time ,etc
Q:What are the shipping ports?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q:About product prices?
A:Prices vary from period to period due to cyclical changes in the price of raw materials.
Q:How long does your delivery time take?
A:In general, our delivery time is within 5-45 days, and may be delayed if the demand is extremely
large or special circumstances occur.
Q:Can I visit your location?
A:Of course, we welcome customers from all over the world to visit our factory. However, some
of the plants are not open to the public.
Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified
products will be destroyed.We provide All original Mill test certificate and support third party inspection.
Q:How to pack the products?
A:The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Q:What is your working time?
A:In general, our online service time is Beijing time: 8:00-22:00, after 22:00,
we will reply to your inquiry during the next working day.
904l Stainless steel sheet ,coil ASTM B625 UNS N08904 Application
Product Tags:
|
|
UNS S32101 Cold Rolled Stainless Steel Sheets Carbon LDX 2101 Images
|
